INQUIRIES  
   

The following checklist will help you select the proper design for your rubber part application.

  
Application   

 
Material Type (Silicone, Natural Rubber, EPDM, etc...):
 
 
Hardness or Durometer (Typically between 30 & 80 Shore A):
 
 
Dimensional Tolerances: refer to our Design Guide section for industry standard tolerances. SRRP manufactures the majority of our parts based on Class 2 "Precision" tolerances. This may vary with part geometry.
 
 
Estimated Annual Usage (critical for determining size of tool to assure most cost effective option):
 
 
Which physical properties are important? (SG, tensile strength, elongation %, tear strength, compression set)